Skip to content

Plumbers Gresham is a referral service, not a plumbing company. The plumber you talk to works for an independent local business.

Plumbers Gresham

Fairview

Plumber in Fairview

Fairview runs its own water system on deep wells, separate from Gresham's. A few of its rules affect water heaters and leaks in particular.

Call (503) 555-0138

Water heaters and the backflow device

Fairview's water FAQ warns that when a backflow prevention device is installed at the meter, you may need to protect your water heater from thermal expansion. Without that protection, heated water has nowhere to go and the relief valve on the heater starts to drip or discharge.

If yours does that, ask the plumber about an expansion tank, or call the city's water staff on 503-665-9320 (weekdays, 8:30 to 4:30) to ask whether your meter has a device fitted.

Small leaks and pressure

A pinhole is worth fixing

The city's FAQ puts a number on it: a pinhole one-sixteenth of an inch across in a line at 60 psi can waste 25,000 gallons in a month. If the meter test shows a leak, don't wait for it to get worse.

Pressure

The system is designed to deliver at least 40 psi. The city will check the pressure at a specific location if you call 503-665-9320, which helps tell a city issue from a fault in your own pipes.

Where Fairview is

Sketch map: where Fairview sits among Gresham and its neighborsColumbia RiverSpringwater CorridorGreshamTroutdaleWood VillageFairviewEast PortlandDamascusBoring
Sketch, not to scale. Fairview lies directly north of Gresham, west of Wood Village.

Permits and the shut-off

Fairview takes building and plumbing permit applications online through Oregon ePermitting. Its FAQ says a permit is needed even to remove a backflow assembly, pulled either by a homeowner doing their own work or by a licensed plumber.

The city's tip for cutting a water bill is one worth doing anyway: find the main shut-off valve that turns off water to the whole house, and make sure it works.

Discolored water after the city flushes its mains usually clears if you run each cold tap until it comes out clean. Fairview's FAQ has the rest.

Still deciding? Talking costs nothing but a few minutes.

Describe the problem, ask when someone could look, and ask how the visit is charged. If the answer doesn't suit you, you can end the call and nothing has been agreed.

Ready to describe the problem?

Say what is happening and where. You speak with an independent local plumbing company and decide with them what happens next.

Call (503) 555-0138

Calls may be recorded. See how this referral is paid for and the privacy policy.

Call (503) 555-0138