Garbage disposals
Garbage disposal repair and replacement
A disposal that hums, trips its reset button or leaks under the sink is often an easy fix. Leaks from the body of the unit are not.
Safe checks first
- Turn the disposal off at the switch, and unplug it or switch off its breaker before reaching near it.
- Never put a hand inside the grinding chamber.
- Many units have a hex socket in the middle underneath. Turning it back and forth with the matching key frees a jam.
- Press the red reset button on the bottom after a jam clears.
- Run cold water when you test it again.
Leaks: where from?
Top, at the sink
The sink flange seal. Often fixable by resealing without replacing the unit.
Side, at a pipe
The dishwasher hose or the drain pipe connection. Usually a clamp or gasket.
Bottom, from the body
The inside seals have failed and water is reaching the motor. Replacement is the usual answer.
Replacing a disposal
Gresham's list of projects without a permit includes replacing an existing garbage disposal of 30 amps or less. A new disposal where there wasn't one is different: ask the plumber about the drain layout and the electrical supply under the sink.
Food waste that won't grind belongs in the bin or compost: grease, fibrous peels and coffee grounds end up in the drain line, which is a bigger job than the disposal.
Still deciding? Talking costs nothing but a few minutes.
Describe the problem, ask when someone could look, and ask how the visit is charged. If the answer doesn't suit you, you can end the call and nothing has been agreed.
Ready to describe the problem?
Say what is happening and where. You speak with an independent local plumbing company and decide with them what happens next.
Call (503) 555-0138Calls may be recorded. See how this referral is paid for and the privacy policy.